KHOROSHKI Technical rider (sound department)
This whole techical rider consists of four (4) pages
PA SYSTEM:
The system must be of high quality, preferably with 3- or 4-ways active crossovers,
stereo. It must cover the entire venue and play 110 dB at the mixing console without
distortion.
e.g.: Meyer, D&B, Turbosound, EAW, L-Acoustics (preferably linear array).
We need one system-technician FOH -who is familiar with the PA system- during the get-in, sound check, concert and load out.
MIXER:
32 channels, with 4 stereo channels and all aux. available), 4 stereo group, 4 band
parametric eq. Preferably Midas (analog console), or Digidesign Venue, Digico etc.
(digital).
Min. 7 aux. 4mon (pre), 3 FX (post).
OUTBOARD:
1 x reverb unit, e.g: Lexicon PCM 80/91, TC M-5000, M-3000 or similar.
1 x SPX 990 or SPX 2000.
1 x Delay (T.C. Electronics D2/2290). Must have TAP-function!
8 channels compressor, e.g: DBX (NOT 266), Drawmer, BSS or KLARK.
5 channels gates , e.g: Drawmer 201.
Graphic 31-band eq 2-channels (mix) by FOH, e.g: Klark DN 360.
1 x MD deck with AUTO PAUSE function, e. g. Sony MDS-B4P.
1 xCD deck
1 x 2-channel Delay line for PA system (if impossible adjust the overall delay PA by
system processors)
MONITORS:
4 separate monitor channels w/31-band graphic E.Q. on each channel.
8 monitors, 12-15”. Preferably small and low-profile. E.g: EAW MicroWedge MW15,
Outline H.A.R.D.
2 side fills (mono) – 4 side fills in the deep stages
1drummers monitor with sub. E. g. EAW MicroWedge MW15 + EAW Microsub.
BACKLINE
Drums
DW, TAMA Starclassic, Yamaha Maple
20’ or 22’ Bass Drum
10’ Rack Tom
14’ Rack Tom
16’ Floor Tom
18’ Floor Tom
3 cymbal stands, at least two with boom
1 hi-hat stand
1 snare stand
1 drum throne
1 carpet 2x3 m
Percussion
1 keyboard X-stand for Glockenspiel 1 Free standing percussion table 1 stand for Chimes
BASS
1 Bass Combo (100-150 W). E. g. Ampeg BA 115, SWR Spellbinder 1 DI-box (e. g.BSS, Radial,Klark)
Mic stands
All mic stands in stage should be with boom.
